Nikon SLM Solutions today unveiled MACHX at Formnext 2026, a new family of metal laser powder bed fusion systems designed for series production. Available in three build envelopes, MACHX combines up to 8 kW of laser power, changeover in just 25 minutes and a compact footprint, so manufacturers can start with a single system and scale to a fleet on the same factory floor.
Metal additive manufacturing has spent a decade competing on speed. Customers are now asking different questions: how much a system produces for the floor space it occupies, how reliably it performs build after build, and how easily production can grow. MACHX is built around those questions, and around a measure Nikon SLM Solutions calls throughput density: how much a factory floor produces per square meter.
One platform, three build envelopes. MACHX shares one architecture across three systems. The MACHX 450 offers a 450 × 450 × 450 mm build envelope for general industrial production. The MACHX 450C extends the Y axis to 450 × 600 × 450 mm for automotive and other long, flat parts. The MACHX 450E extends the Z axis to 450 × 450 × 1,000 mm for tall components such as rocket engine thrust chambers. Because the platform, software and process are shared, parameters and know-how developed on one system carry across the family.
Built to run as a fleet. MACHX is designed to grow with production rather than be re-placed by it. Customers can start with one system and add laser power, automation and further systems as demand increases. Laser and optics packages can be upgraded after purchase, and each module is validated independently, so a single unit can be serviced without taking the system out of production. With the optional cylinder exchange, the next cylinder is preheated outside the build chamber while the current job runs. Nikon layer-surface monitoring technology then levels the platform and verifies the first powder layer automatically, so the next build starts just 25 minutes after the last one finishes. Interfaces for automated material handling and shared depowdering allow several systems to work as one production cell, and a 230 L Universal Powder Tank supports long, uninterrupted production runs.
More output per square meter. MACHX is engineered for maximum output from a minimum footprint. The MACHX 450E places around 200 liters of build volume in approximately 13 m² of floor space. For manufacturers planning capacity, that means more parts from the floor they already have, and a fleet that can expand without a new building.
Power with control. MACHX offers up to 8 kW of total laser power: four or eight 1 kW Gaussian lasers, or four 2 kW lasers with selectable beam-shaping options, so the energy can be matched to the material and the part. A new generation of optics, developed together by Nikon optical engineers and Nikon SLM Solutions engineers, controls up to 2 kW per laser. Zoom and defocus adjust the beam from 80 to 760 µm during the build, and advanced galvo control supports both productivity and part accuracy.
Control the thermal history. Higher laser power brings more heat into the process. MACHX uses interchangeable plate packages for different temperature regimes. The low-temperature package actively cools between 80 and 200 °C, with about eight times the cooling performance of previous systems, and a mid-temperature package covers 200 to 450 °C. Sensors under the build plate, a liquid-cooled process chamber and build part thermal conditioning ensure that every part on the plate sees the same thermal history.
MACHX is also the first platform for SLMX, Nikon SLM Solutions’ fully adaptive process ecosystem. SLMX brings together the thermal architecture, PanX simulation, build processing, optical tomography, advanced optics and process intelligence, so that performance on the first build carries through to the thousandth.
“Customers are no longer asking whether additive manufacturing is possible. They are asking how fast it can run, how reliably it can perform, and how confidently it can scale. MACHX is our answer to all three. It is built for the parts most of the industry actually makes, and for the factories that need to make many more of them. Others name machines. We name outcomes,” said Sam O’Leary, Chief Executive Officer, Nikon SLM Solutions.
“We designed MACHX so that the first system a customer buys is the start of their production line, not the limit of it. The same platform runs across three build envelopes, lasers and automation can be added as volumes grow, and every system added makes the whole fleet more productive. That is what throughput density means on a real factory floor,” said Simon Merkt-Schippers, Executive Vice President Product Management, Nikon SLM Solutions.
